18 FREE Liquid Measurements Charts

Liquid Measurements Charts

When preparing a meal, you may come across a measurement in your recipe written in quarts, but you only have cups or spoons. Your options at this point would be to give up or calculate and convert the measurements. The latter choice is where a liquid measurements chart comes in. This document will help you make quick and easy conversions, whether you need them for cooking or work.

What Is a Liquid Measurements Chart?

A liquid measurements chart is a table document that shows the value conversions of liquid volumes from one system of measurement to another. For example, it can show you the values of a given millimeter volume in liters, fluid ounces, gallons, etc. Usually, the chart starts with metric values and converts them into other systems because they are the most commonly used.

Different Tools Used for Liquid Measurement

Liquid measurement refers to the amount of liquid present in a given vessel. It is also called the volume or capacity and can be measured through the following tools:

Laboratory Equipment

Laboratory equipment can be used to measure liquid volumes at high accuracy levels for use in chemical experiments. Common such tools include graduated cylinders, conical flasks, test tubes, and beakers.

Measuring Cups or Pitchers

When cooking or measuring liquids at home, you can use simple tools like measuring cups, spoons, and pitchers. These come in handy when you are cooking and need precise ingredient quantities.

Basic Liquid Measure Conversions (US)

There are countless ways to measure liquid volumes, especially across nations. While some conversations are simple enough, you can do them off the top of your head; others are more difficult to remember. This chart of basic liquid measure conversions will help you convert volumes in the US:

  Teaspoon  Tablespoon  Fluid Ounce  Cup  Pint  Quart  Gallon

Fluid Ounce to Metric

When reading a recipe from a country that uses the metric system and you are unfamiliar with the measurements, you will need to convert them into fluid ounces. Here is a conversion table to help you. You should note that the values are rounded to the nearest whole number.

MetricFluid Ounces
3.8 Liters126
1.9 Liters64
  946 Milliliters  32
473 Milliliters16
237 Milliliters8
118 Milliliters4
59 Milliliters2
30 Milliliters1
15 Milliliters½

US Vs. UK Differences

As mentioned earlier, measurement systems can vary from country to country. For example, the terms ‘gallon’ and ‘pint’ can have a different meaning in the UK than they do in the US. These differences can result in confusion when comparing prices and quantities, which is why it is crucial to understand them. Below, we compare UK Imperial Units to US Customary Units:

  • Fluid Ounce. A fluid ounce is approximately 30ml of liquid in both the US and UK. However, the exact value in the UK is 28.4ml and 29.6ml in the US.
  • Gallon. A gallon in the US is about 3.8 liters, 8 pints, and 128 fluid ounces. In the UK, it is about 4.5 liters, 8 pints, and 160 fluid ounces.
  • Pint. A pint in the US is approximately 473ml or 16 fluid ounces, but 568ml and 20 fluid ounces in the US.

Liquid Measurements Charts and Templates

Liquid Measurements Chart #01

Liquid Measurements Chart #02

Liquid Measurements Chart #03

Liquid Measurements Chart #04

Liquid Measurements Chart #05

Liquid Measurements Chart #06

A Handy Conversion Chart

Controlling Your Fluids

Helpful Tips and Recipes

Imperial to Metric Conversions for Cooking

Kitchen Measurement Conversion Tables

Liquid Fuel Measurements and Conversions

Liquid Measurement Chart



Measurement & Conversion Guide

Metric Conversion Chart

Metric Dosage and Apothecary Equivalents

    Tips for Using Measuring Tools

    Using the right tool is rule number one when measuring liquid volumes. Once you have the ideal equipment for the job, take the following pointers into account:

    • Always place the liquid measuring cup, flask, or pitcher on a flat surface. You might be tempted to hold it up to your eye level, but this could change the reading.
    • When reading measurements, lower your eyes so that you are reading at eye level and are not viewing the liquid meniscus from above or below.
    • Don’t use measuring spoons designed to measure dry ingredients as they could be slightly inaccurate.
    • Use measuring spoons for small increments under two fluid ounces and measuring cups for larger volumes.
    • When using a measuring spoon, fill it to the rim.

    Tips for Creating a Liquid Measurements Chart

    While you can easily download a liquid measurements chart, getting a template and preparing your own table is more engaging. Here are some tips to help you:

    • Include the table title at the top of the page along with a simple description of its purpose, e.g., Liquid Volume Conversion Chart.
    • Include your full name and that of your school or company.
    • If you need the chart for work or school, briefly describe the table and provide useful notes for other users, e.g., on the measurement systems used.
    • Place standard values in the first column and list all other measurement systems you would like to use.
    • Create a table that shows the standard values and their conversions. You can do the calculations manually or use an online converter for speed.
    • Lastly, outline your measurement collection methodology and calculations. This is optional but can come in handy when sharing the chart.

    Frequently Asked Questions

    What are the units of liquid volume?

    When using the metric system, the units of liquid volume are milliliters and liters. Other standard measurements include quarts, gallons, cups, and pints.

    What is the standard unit to measure liquid?

    The standard measurements units for liquids under the International System are milliliter (ml), centiliter (cl), liter (l), and kiloliter (kl).

    What is an example of liquid volume?

    Liquid volume refers to the amount of liquid a container can hold. A good example is a 1-liter bottle of water, milk, or soda.

    What are 3 ways to measure volume?

    Liquid volume is normally measured using:

    • Special tools like burettes, graduated cylinders, and conical flasks.
    • Measuring cups, where a standard set includes a quarter, third, half, and one cup measure.
    • Measuring spoons, where a standard set contains a quarter teaspoon, half teaspoon, one teaspoon, and one tablespoon measures.

    Final Thoughts

    A liquid measurements chart can help you easily navigate the otherwise complex world of unit conversions. When measuring liquids to update your chart, avoid using dry measuring cups or spoons because they could give you inaccurate values. It is also advisable to cross-check your findings against an online convertor or professional chart.